Author: extremekiler
Length: 02:19
A tutorial on how to install an amplifier for house uses.Sorry for the bad quality, recorded with mobile phone.Ok, thanks for watching my video.List:Car amplifierPower supply(can be from a PC)Good wires-(thick wires)And a capacitor(optional, Capacitor for 25V, 1Farath)Proceedures:First grab your power supply, and in the main connector(the bigges one that connects to the motherboard) connect the green wire to the/a black wire(this proceedure will enable the power supply to turn on simply when ON button is pressed).Now in the secundary connectors, there are 2 black wires, 1 yellow wire and one red wire(in each of them).Yellow-12V---Red-5V---Bl ck-Negative pole. Connect your own wires to the YELLOW output (connect wires that you bought/had to yellow output on as many secundary connectors as you can(F.ex. You have 5 secundary connectors, connect 5 wires to each output)). Do the same with black wires.Now that you have the 12V+ and Negative pole wires, connect the wires that have 12V+(yellow wires) to the "12V+" on the amp, and connect the negative(black) wires to the "Ground" on the amp.Grab another wire that you bought/had, and connect the "12V+" on the amp, to the "Remote" on the amp(this will enable the amplifier to turn on whenever the power supply is on).Ok now connect the capacitor(optional) from the "Ground" to the "12V+" on the amp.Connect your speakers and you're done!Any doubts, tell me =)